Top 25 Best Waterway Spa Pumps

 

Waterway 2 Speed 20 Hp 230v Spa Pump 3420820-15

Waterway 2 Speed 2.0 Hp 230v Spa Pump 3420820-15

Waterway 2 Speed 2.0 Hp 230v Spa Pump 3420820-15 - 3420820-15.

 

Waterway 3420820-15 2 HP 230V 48 Frame Spa Pump

Waterway 3420820-15 2 HP 230V 48 Frame Spa Pump

Waterway 3420820-15 2 HP 230V 48 Frame Spa Pump - Waterway pumps are newly manufactured, for use as replacement spa pumps and are identical to pumps used by leading hot tub manufacturer’s. A. And are very high quality hot tub pumps. 5″ intake and dischargewet end can be rotated for easy installationavailable in 3/4 to 3 hp, 1 or 2 speedincludes 2 unionsdual bearing motor design1725 / 3450 rpmdual speed motor. 2 hp waterway 48-frame spa pump, center discharge, dual speed, 230v, 1 ½” intake / dischargewaterway pumps are manufactured by waterway plastics in the u. 0hp center discharge 48 frame 5. 5″ diameter 1. 5″ cd/csspecificationsenergy efficient motorthermal protection1. S. Features342082015 waterway spa pump 2-speed, 230v, 10. 6 a2. 5/2.

 

Waterway Plastics 3410310-15 34 Hp 115v 1-speed Spa Pump 1 2&quot Center Discharge

Waterway Plastics 3410310-15 3/4 Hp 115v 1-speed Spa Pump 1 2" Center Discharge

Waterway Plastics 3410310-15 3/4 Hp 115v 1-speed Spa Pump 1 2" Center Discharge - Automatic overload protection 1 year manufacture warranty. Wet end can be rotated for easy installation. 3/4 hp 3450 rpm, 1-speed, 98 amps, 115v 60hz. Overall length = 16″ height 735″ automatic overload protection. Reliable center discharge performance, 15″ inlet/outlet.

 

Waterway 310-4010 Gray Impeller Replacement For Waterway Hi-flo Discharge Series 15-horsepower Pool And Spa Pump

Waterway 310-4010 Gray Impeller Replacement For Waterway Hi-flo Discharge Series 1.5-horsepower Pool And Spa Pump

Waterway 310-4010 Gray Impeller Replacement For Waterway Hi-flo Discharge Series 1.5-horsepower Pool And Spa Pump - Impeller replacement. Available in gray color. Measures 3-2/3-inch length by 4/5-inch width size. Fits waterway hi-flo discharge series 15-horsepower pool and spa pump. This has an extended inlet opening and at the shaft side.

 

Waterway Ex2 Spa Pump Sealamp Oring Kit

Waterway Ex2 Spa Pump Seal & O’ring Kit

Waterway Ex2 Spa Pump Seal & O’ring Kit - Kit includes #8, #7, #2 , (2) coupler orings, and lube pack. Fits both 48-frame & 56-frame motors. Quality tork replacement parts. Waterway ex2 spa pump seal & o’ring kit.

 

Waterway Executive 56 Frame Spa Pump 5 Hp Impeller 310-4180

Waterway Executive 56 Frame Spa Pump 5 Hp Impeller 310-4180

Waterway Executive 56 Frame Spa Pump 5 Hp Impeller 310-4180 - The impeller is used to generate pressure within the pump. . This is an impeller used on the waterway executive 48/56 frame and mustang pumps.

 

3 hp 230V 2-Speed Waterway Spa Pump Side Discharge  48 Frame Executive  3421221-1A

3 hp 230V 2-Speed Waterway Spa Pump Side Discharge | 48 Frame Executive | 3421221-1A

3 hp 230V 2-Speed Waterway Spa Pump Side Discharge | 48 Frame Executive | 3421221-1A - Ships with 2″ unions. D. The wet ends can be rotated by simply loosening the motor thru bolts and turning the pump head. When removing power cord from existing pump we recommend you mark your wires for “common”, “high speed”, “low speed”. 2″ inlet & outlet measures 3″ o. 2″ refers to the size of your pvc plumbing supply lines. If you are unsure if this pump will work for you, please call us, we can help assist you in your selection. The connection diagram for the new pump is located on the motor name plate. Please read there is no industry standard for unions. On the threads. If you only require a one speed pump, this pump will work fine. If your heater is directly coupled to the spa wet end, then our pump will probably not work as the union will most likely be different. The pump does not come with a power cord. 2″ plumbing means you have 2″ schedule 40 pvc supply lines (2″ i. Be sure to look at the motor voltage, not the voltage supplied to the spa to determine the correct pump voltage. The various brands have their own unique style, which means you must use the unions provided with our spa pump. This will most likely involve cutting off your old unions and installing the new ones shipped with the spa pump. It has nothing to do with the size of the union nuts, the size of the threads on the wet end or the inside diamater of the inlet/outlet. D. The pvc pipe slides into the union and is glued with pvc cement. 2 3/8″ od on the line) circumference = 8″ (wrap a tape measure around the pipe). Simply just use the high speed connection. Not self priming-water must be above pump head in order to operate properly.

 

Waterway 3722021-1d 2speed 5hp 230v Spahot Tub Pump

Waterway 3722021-1d 2speed 5hp 230v Spa/hot Tub Pump

Waterway 3722021-1d 2speed 5hp 230v Spa/hot Tub Pump - Highly versatile wet end can be rotated every 90 degrees. Large 6 1/2″ diameter wet end for higher head pressure. 56 frame motor for added strength, cooler operating temperature and longer motor life. Executive wet end designed specifically for 56 frame motors. Two double shielded ball bearings with moisture resistant grease for quieter operation and longer life.

 

Waterway Plastics 3420620-15 15 hp 230V 2-Speed Spa Pump 1 2 Center Discharge

Waterway Plastics 3420620-15 1.5 hp 230V 2-Speed Spa Pump 1 2″ Center Discharge

Waterway Plastics 3420620-15 1.5 hp 230V 2-Speed Spa Pump 1 2″ Center Discharge - The connection diagram for the new pump is located on the motor name plate. 5″ refers to the size of your pvc plumbing supply lines. If you only require a one speed pump, this pump will work fine. When removing power cord from existing pump we recommend you mark your wires for “common”, “high speed”, “low speed”. The wet ends can be rotated by simply loosening the motor thru bolts & turning the pump head, allowing the discharge to pt. 5″ i. 1. D. The various brands have their own unique style, which means you must use the unions provided with our spa pump. 1. On the line) circumference = 6. 5″ plumbing means you have 1. To 3 o’clock, 9 o’clock or 6 o’clock. The pump does not come with a power cord. It has nothing to do with the size of the union nuts, the size of the threads on the wet end or the inside diameter of the inlet/outlet. 5″ schedule 40 pvc supply lines (1. Be sure to look at the motor voltage, not the voltage supplied to the spa to determine the correct pump voltage. Simply just use the high speed connection. The pvc pipe slides into the union & is glued with pvc cement. 5″ (wrap a tape measure around the pipe). If you are unsure if this pump will work for you, please call us, we can help assist you in your selection. D. 1 7/8″ o. Please read there is no industry standard for unions. This will most likely involve cutting off your old unions & installing the new ones (400-4060) shipped with the spa pump. If your heater is directly coupled to the spa wet end, then our pump will probably not work as the union will most likely be different. Optional debris basket 310-5400 available. Not self priming-water must be above pump head in order to operate properly.

 

Waterway Plastics 3420820-1A 2 hp 230V 2-Speed 2 x 2 48 Frame Executive Spa Pump Side Discharge

Waterway Plastics 3420820-1A 2 hp 230V 2-Speed 2″ x 2″ 48 Frame Executive Spa Pump Side Discharge

Waterway Plastics 3420820-1A 2 hp 230V 2-Speed 2″ x 2″ 48 Frame Executive Spa Pump Side Discharge - When removing power cord from existing pump we recommend you mark your wires for “common”, “high speed”, “low speed”. Simply just use the high speed connection. On the threads. This will most likely involve cutting off your old unions & installing the new ones shipped with the spa pump. The connection diagram for the new pump is located on the motor name plate. The wet ends can be rotated by simply loosening the motor thru bolts & turning the pump head. Ships with 2″ unions. The various brands have their own unique style, which means you must use the unions provided with our spa pump. It has nothing to do with the size of the union nuts, the size of the threads on the wet end or the inside diameter of the inlet/outlet. The pump does not come with a power cord. 2″ inlet & outlet measures 3″ o. 2″ refers to the size of your pvc plumbing supply lines. Please read there is no industry standard for unions. Be sure to look at the motor voltage, not the voltage supplied to the spa to determine the correct pump voltage. If you are unsure if this pump will work for you, please call us, we can help assist you in your selection. If your heater is directly coupled to the spa wet end, then our pump will probably not work as the union will most likely be different. The pvc pipe slides into the union & is glued with pvc cement. If you only require a one speed pump, this pump will work fine. 2″ plumbing means you have 2″ schedule 40 pvc supply lines (2″ i. Not self priming-water must be above pump head in order to operate properly. D. 2 3/8″ od on the line) circumference = 8″ (wrap a tape measure around the pipe). D.

 

Waterway Plastics 3721621-1 4-horsepower Dual Speed Thru-bolt Motor Replacement For Pool And Spa Pump

Waterway Plastics 3721621-1 4-horsepower Dual Speed Thru-bolt Motor Replacement For Pool And Spa Pump

Waterway Plastics 3721621-1 4-horsepower Dual Speed Thru-bolt Motor Replacement For Pool And Spa Pump - Fits pool and spa pump. Thru-bolt motor replacement. Measures 6-1/2-inch barrel diameter. Features dual speed, 4-horsepower, 124-ampere and 230-volt motor.

 

Waterway Plastics 3420610-15 48-frame Spa Pump

Waterway Plastics 3420610-15 48-frame Spa Pump

Waterway Plastics 3420610-15 48-frame Spa Pump - Large 2 &frac12 in intake for improved flow performance and reduced noise. Large 6 &frac12 in diameter wet end for higher head pressure. Executive wet end designed specifically for 48-frame motors. Highly versatile wet end can be rotated every 90°. Thermally protected to extend life expectancy of motor.

 

Waterway Plastics 3420410-15 1 hp 115V 2-Speed Spa Pump 1 2 Center Discharge

Waterway Plastics 3420410-15 1 hp 115V 2-Speed Spa Pump 1 2″ Center Discharge

Waterway Plastics 3420410-15 1 hp 115V 2-Speed Spa Pump 1 2″ Center Discharge - 1. 1 7/8″ o. To 3 o’clock, 9 o’clock or 6 o’clock. 5″ plumbing means you have 1. D. Be sure to look at the motor voltage, not the voltage supplied to the spa to determine the correct pump voltage. D. On the line) circumference = 6. When removing power cord from existing pump we recommend you mark your wires for “common”, “high speed”, “low speed”. If your heater is directly coupled to the spa wet end, then our pump will probably not work as the union will most likely be different. The connection diagram for the new pump is located on the motor name plate. The pump does not come with a power cord. 5″ schedule 40 pvc supply lines (1. Please read there is no industry standard for unions. It has nothing to do with the size of the union nuts, the size of the threads on the wet end or the inside diameter of the inlet/outlet. Optional debris basket 310-5400 available. 5″ (wrap a tape measure around the pipe). The pvc pipe slides into the union & is glued with pvc cement. 1. Not self priming-water must be above pump head in order to operate properly. Simply just use the high speed connection. The various brands have their own unique style, which means you must use the unions provided with our spa pump. This will most likely involve cutting off your old unions & installing the new ones (400-4060) shipped with the spa pump. 5″ refers to the size of your pvc plumbing supply lines. If you only require a one speed pump, this pump will work fine. The wet ends can be rotated by simply loosening the motor thru bolts & turning the pump head, allowing the discharge to pt. If you are unsure if this pump will work for you, please call us, we can help assist you in your selection. 5″ i.

 

Waterway Plastics 3420410-1A 1 hp 115V 2-Speed Spa Pump 2 x 2 48 Frame Executive Side Discharge

Waterway Plastics 3420410-1A 1 hp 115V 2-Speed Spa Pump 2″ x 2″ 48 Frame Executive Side Discharge

Waterway Plastics 3420410-1A 1 hp 115V 2-Speed Spa Pump 2″ x 2″ 48 Frame Executive Side Discharge - 2″ inlet & outlet measures 3″ o. If you are unsure if this pump will work for you, please call us, we can help assist you in your selection. 1. Please read there is no industry standard for unions. Be sure to look at the motor voltage, not the voltage supplied to the spa to determine the correct pump voltage. The pvc pipe slides into the union & is glued with pvc cement. 1. It has nothing to do with the size of the union nuts, the size of the threads on the wet end or the inside diameter of the inlet/outlet. The wet ends can be rotated by simply loosening the motor thru bolts & turning the pump head. If your heater is directly coupled to the spa wet end, then our pump will probably not work as the union will most likely be different. 5″ i. This will most likely involve cutting off your old unions & installing the new ones shipped with the spa pump. D. When removing power cord from existing pump we recommend you mark your wires for “common”, “high speed”, “low speed”. Simply just use the high speed connection. D. On the threads. If you only require a one speed pump, this pump will work fine. Not self priming-water must be above pump head in order to operate properly. Ships with 1. 1 7/8″ od on the line) circumference = 6″ (wrap a tape measure around the pipe). 5″ refers to the size of your pvc plumbing supply lines. The pump does not come with a power cord. 5″ schedule 40 pvc supply lines (1. The various brands have their own unique style, which means you must use the unions provided with our spa pump. 5″ unions. 5″ plumbing means you have 1. The connection diagram for the new pump is located on the motor name plate.

 

Waterway 3410020-1e 0125hp 230v Single Speed Spa Pump

Waterway 3410020-1e 0.125hp 230v Single Speed Spa Pump

Waterway 3410020-1e 0.125hp 230v Single Speed Spa Pump - 24 hour circulation pump. 230 volts. Side discharge for optimum flow. Delivers 40 gallons per minute. 48 frame proven design.

 

Waterway Plastics Swimming Poolspa Pump Replacement Seal ps-1000 Same As 319-3100b This Is An American Manufactured

Waterway Plastics Swimming Pool/spa Pump Replacement Seal (ps-1000) Same As: (319-3100b) This Is An American Manufactured

Waterway Plastics Swimming Pool/spa Pump Replacement Seal (ps-1000) Same As: (319-3100b) This Is An American Manufactured - Same as (319-3100b). Quality us seals sold by tork distributors. Waterway plastics swimming pool/spa pump replacement seal (ps-1000).

 

Waterway Plastics 3420620-1A 15 hp 230V 2-Speed 2 x 2 48 Frame Executive Spa Pump Side Discharge

Waterway Plastics 3420620-1A 1.5 hp 230V 2-Speed 2″ x 2″ 48 Frame Executive Spa Pump Side Discharge

Waterway Plastics 3420620-1A 1.5 hp 230V 2-Speed 2″ x 2″ 48 Frame Executive Spa Pump Side Discharge - 2″ inlet & outlet measures 3″ o. If your heater is directly coupled to the spa wet end, then our pump will probably not work as the union will most likely be different. Not self priming-water must be above pump head in order to operate properly. Please read there is no industry standard for unions. 1 7/8″ od on the line) circumference = 6″ (wrap a tape measure around the pipe). The pump does not come with a power cord. 5″ schedule 40 pvc supply lines (1. 5″ unions. If you are unsure if this pump will work for you, please call us, we can help assist you in your selection. 5″ plumbing means you have 1. The wet ends can be rotated by simply loosening the motor thru bolts & turning the pump head. If you only require a one speed pump, this pump will work fine. When removing power cord from existing pump we recommend you mark your wires for “common”, “high speed”, “low speed”. The pvc pipe slides into the union & is glued with pvc cement. It has nothing to do with the size of the union nuts, the size of the threads on the wet end or the inside diameter of the inlet/outlet. 5″ refers to the size of your pvc plumbing supply lines. The connection diagram for the new pump is located on the motor name plate. 1. 1. D. On the threads. Ships with 1. D. Simply just use the high speed connection. 5″ i. Be sure to look at the motor voltage, not the voltage supplied to the spa to determine the correct pump voltage. The various brands have their own unique style, which means you must use the unions provided with our spa pump. This will most likely involve cutting off your old unions & installing the new ones shipped with the spa pump.

 

Waterway 2 Speed 45 Hp 230v Spa Pump 3421821-13

Waterway 2 Speed 4.5 Hp 230v Spa Pump 3421821-13

Waterway 2 Speed 4.5 Hp 230v Spa Pump 3421821-13 - 3421821-13.

 

Waterway 310-1150sd Hi-flo Side Discharge 3hp 230v Wet End Spa Pump

Waterway 310-1150sd Hi-flo Side Discharge 3hp 230v Wet End Spa Pump

Waterway 310-1150sd Hi-flo Side Discharge 3hp 230v Wet End Spa Pump - Waterway hi-flo side discharge wet end complete. 2″ intake and 2″ discharge.

 

45HP 230V 2-Speed Waterway Spa Pump Side Discharge  48 Frame Executive  3421821-1A

4.5HP 230V 2-Speed Waterway Spa Pump Side Discharge | 48 Frame Executive | 3421821-1A

4.5HP 230V 2-Speed Waterway Spa Pump Side Discharge | 48 Frame Executive | 3421821-1A - The wet ends can be rotated by simply loosening the motor thru bolts and turning the pump head. Not self priming-water must be above pump head in order to operate properly. 2 3/8″ od on the line) circumference = 8″ (wrap a tape measure around the pipe). If you are unsure if this pump will work for you, please call us, we can help assist you in your selection. . Please read there is no industry standard for unions. D. On the threads. This will most likely involve cutting off your old unions and installing the new ones shipped with the spa pump. The pvc pipe slides into the union and is glued with pvc cement. The pump does not come with a power cord. When removing power cord from existing pump we recommend you mark your wires for “common”, “high speed”, “low speed”. D. Simply just use the high speed connection. Be sure to look at the motor voltage, not the voltage supplied to the spa to determine the correct pump voltage. 2″ refers to the size of your pvc plumbing supply lines. 2″ inlet & outlet measures 3″ o. Ships with 2″ unions. The connection diagram for the new pump is located on the motor name plate. If your heater is directly coupled to the spa wet end, then our pump will probably not work as the union will most likely be different. The various brands have their own unique style, which means you must use the unions provided with our spa pump. It has nothing to do with the size of the union nuts, the size of the threads on the wet end or the inside diamater of the inlet/outlet. If you only require a one speed pump, this pump will work fine. 2″ plumbing means you have 2″ schedule 40 pvc supply lines (2″ i.

 

Waterway 400-4030b 1-12-inch Slip By 1-12-inch Mpt Union Assembly Replacement For Waterway Pool And Spa Pump

Waterway 400-4030b 1-1/2-inch Slip By 1-1/2-inch Mpt Union Assembly Replacement For Waterway Pool And Spa Pump

Waterway 400-4030b 1-1/2-inch Slip By 1-1/2-inch Mpt Union Assembly Replacement For Waterway Pool And Spa Pump - Measures 1-1/2-inch slip by 1-1/2-inch mpt. Fits waterway pool and spa pump. Union assembly replacement.

 

Waterway Executive Spa Pump Side Discharge 56-frame 2&quot 40hp 230v 2-speed 3721621-1d

Waterway Executive Spa Pump Side Discharge 56-frame 2" 4.0hp 230v 2-speed 3721621-1d

Waterway Executive Spa Pump Side Discharge 56-frame 2" 4.0hp 230v 2-speed 3721621-1d - 4 horsepower. 2″ intake and 2″ discharge. 56 frame. 2 speed. 230 volt.

 

Waterway 319-3250 Hi-flo Series Spa Pump 38&quot Drain Plug With O-ring

Waterway 319-3250 Hi-flo Series Spa Pump 3/8" Drain Plug With O-ring

Waterway 319-3250 Hi-flo Series Spa Pump 3/8" Drain Plug With O-ring - Waterway strainer trap. Drain plug. Waterway. Plug stops your pump from sucking in air. 3/8″.

 

Waterway 311-1210 Executive Pool And Spa Pump Faceplate 25 In

Waterway 311-1210 Executive Pool And Spa Pump Faceplate, 2.5 In.

Waterway 311-1210 Executive Pool And Spa Pump Faceplate, 2.5 In. - This is a faceplate used on the waterway mustang and executive pumps.

 

Waterway Plastics 311-1220 Executive 4856 Frame Spa Pump Faceplate 2&quot

Waterway Plastics 311-1220 Executive 48/56 Frame Spa Pump Faceplate, 2"

Waterway Plastics 311-1220 Executive 48/56 Frame Spa Pump Faceplate, 2" - Spa pump faceplate. Made in the usa. Waterway executive.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.